 |
Main features
Steel C type channel roll forming machine is the most popular machine on the market. All the sizes need to produce the width between 80mm to 300mm can be set on PLC control screen and the system will produce corresponding size under the program setting task. C purlin is a traditional building materials in steel construction area, the products are widely used as steel roof and wall support frame of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc.
Working flow
Decoiler -- Feeding & Leveling -- Punching -- Main roll forming -- Hydraulic Cutting -- Out table
Technical parameters
01 | Raw material | GI |
02 | Material Width | According to the profile |
03 | Rolling Thickness | 1.5-3.0 mm |
04 | Rolling Speed | 10-15m/min(not include cutting time) |
05 | Roller Stations | 15 stations |
06 | Punching Station | 1 station |
07 | Leveling Station | 1 station (7 rollers) |
08 | Roller Material | GCR15, HRC58-62℃; coated with chrome |
09 | Shaft Material and DIA | DIA 76mm, material is 45# forge steel |
10 | Main Motor Power | 11kw |
11 | Material Of Cutting | Cr12Mov quenching 58-62℃ |
12 | Hydraulic Station Power | 5.5kw |
13 | Hydraulic Pressure | 16Mpa, adjustable |
14 | Structure Of The Stations | Wall panel |
15 | Way of Drive | 1.5 inch single chain |
16 | Tolerance | 3m+-1.5mm |
17 | Electric Source | 380V, 50HZ,3 phase (According to customer’s require) |
18 | Un Coiler | 5 ton hydraulic de-coiler |
19 | Control System | PLC (Panasonic) |
20 | How to change the size | Change the sleeves between the rollers |
21 | Size of the machine | L*W*H 8.5m*1.5m*1.2m |
Application
RFQ
1. Does one machine can only produce one size?
Not exactly, it depends on which profile the customer want to produce.
2. Do you have after-sales technical support?
Yes,we are happy to give advice and also have skilled technicians available to maintain the machine overseas to customers’ workshop if needed.
3. You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
4. How long the machine could be made?
Normally speaking, high precision roll forming machine could be made out with 40 working days.If you need machines in hurry, we can make it for you less than a month.
5. Do you provide customized?
Sure, we can design the machine according to the requirement and profile drawing you provide. Our engineers can offer the best professional solution to our worldwide clients.
6. May we visit your factory?
Sure,Warmly welcome to our factory at any time.
Main features
Steel C type channel roll forming machine is the most popular machine on the market. All the sizes need to produce the width between 80mm to 300mm can be set on PLC control screen and the system will produce corresponding size under the program setting task. C purlin is a traditional building materials in steel construction area, the products are widely used as steel roof and wall support frame of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc.
Working flow
Decoiler -- Feeding & Leveling -- Punching -- Main roll forming -- Hydraulic Cutting -- Out table
Technical parameters
01 | Raw material | GI |
02 | Material Width | According to the profile |
03 | Rolling Thickness | 1.5-3.0 mm |
04 | Rolling Speed | 10-15m/min(not include cutting time) |
05 | Roller Stations | 15 stations |
06 | Punching Station | 1 station |
07 | Leveling Station | 1 station (7 rollers) |
08 | Roller Material | GCR15, HRC58-62℃; coated with chrome |
09 | Shaft Material and DIA | DIA 76mm, material is 45# forge steel |
10 | Main Motor Power | 11kw |
11 | Material Of Cutting | Cr12Mov quenching 58-62℃ |
12 | Hydraulic Station Power | 5.5kw |
13 | Hydraulic Pressure | 16Mpa, adjustable |
14 | Structure Of The Stations | Wall panel |
15 | Way of Drive | 1.5 inch single chain |
16 | Tolerance | 3m+-1.5mm |
17 | Electric Source | 380V, 50HZ,3 phase (According to customer’s require) |
18 | Un Coiler | 5 ton hydraulic de-coiler |
19 | Control System | PLC (Panasonic) |
20 | How to change the size | Change the sleeves between the rollers |
21 | Size of the machine | L*W*H 8.5m*1.5m*1.2m |
Application
RFQ
1. Does one machine can only produce one size?
Not exactly, it depends on which profile the customer want to produce.
2. Do you have after-sales technical support?
Yes,we are happy to give advice and also have skilled technicians available to maintain the machine overseas to customers’ workshop if needed.
3. You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
4. How long the machine could be made?
Normally speaking, high precision roll forming machine could be made out with 40 working days.If you need machines in hurry, we can make it for you less than a month.
5. Do you provide customized?
Sure, we can design the machine according to the requirement and profile drawing you provide. Our engineers can offer the best professional solution to our worldwide clients.
6. May we visit your factory?
Sure,Warmly welcome to our factory at any time.
+86-17768307386
