 |
Main features
The steel CZ purline is processed by CZ purlin interchangeable roll forming machine, the wall is thin and light, the section has good performance and high strength, and the material is q195-345. Common steel purlins have Z shaped steel purline and C shaped steel purline. The steel purline is the secondary bearing member in the roof structure system, which carries the roof load to the steel frame.
Working flow
Decoiler -- Feeding & Guiding -- Hydraulic Punching and Cutting -- Roll forming -- Product to run out table
Main components
1) Decoiler: 3T manual decoiler
2) Feeding and Flattening Device
Function: it is used to release the head of coil, then feed into roll forming machine, making the coil straight and flat after decoiling
Structure: total 7 rollers, upper are 3 rollers and lower are 4 rollers.
3) Roll Forming Machine
Forming Station: 16 steps
Shaft Diameter: 70mm
Shaft Material: GCR15
Roller Material: High grade 45# steel, with quenched and tempered treatment.
Forming Speed: 10-15m/ min
Transmission Type: 1.0' chain transmission
Machine Frame Stand: Welded structural steel
Frame Stand Thickness: 16mm
4) Cutting & Hydraulic Station
Hydraulic Power: 5.5KW
Cutter Material: Cr12Mov quenching process
Cutting Length Error: ±1.5mm
5) Electrical System
Voltage: 380V & 50HZ & 3 phases
Electrical Control system: PLC board
Encoder electrical control system
Product pictures
Profile drawing
Main features
The steel CZ purline is processed by CZ purlin interchangeable roll forming machine, the wall is thin and light, the section has good performance and high strength, and the material is q195-345. Common steel purlins have Z shaped steel purline and C shaped steel purline. The steel purline is the secondary bearing member in the roof structure system, which carries the roof load to the steel frame.
Working flow
Decoiler -- Feeding & Guiding -- Hydraulic Punching and Cutting -- Roll forming -- Product to run out table
Main components
1) Decoiler: 3T manual decoiler
2) Feeding and Flattening Device
Function: it is used to release the head of coil, then feed into roll forming machine, making the coil straight and flat after decoiling
Structure: total 7 rollers, upper are 3 rollers and lower are 4 rollers.
3) Roll Forming Machine
Forming Station: 16 steps
Shaft Diameter: 70mm
Shaft Material: GCR15
Roller Material: High grade 45# steel, with quenched and tempered treatment.
Forming Speed: 10-15m/ min
Transmission Type: 1.0' chain transmission
Machine Frame Stand: Welded structural steel
Frame Stand Thickness: 16mm
4) Cutting & Hydraulic Station
Hydraulic Power: 5.5KW
Cutter Material: Cr12Mov quenching process
Cutting Length Error: ±1.5mm
5) Electrical System
Voltage: 380V & 50HZ & 3 phases
Electrical Control system: PLC board
Encoder electrical control system
Product pictures
Profile drawing
+86-17768307386
