 |
The profile drawing:
Working flow:
Uncoiler—Feeding—Leveling—Punching--roll forming---hydraulic cut to length—output table
Main specification:
Manual uncoiler
1) Capacity: 5ton
2) Feeding width: MAX 600mm
3) Expanding range: 460-520mm
Main roll forming system
1) Main motor power: 18.5kw
2) Drive: Chain
3) Main shaft dia: 85mm material: 45#forge steel and quenched
4) Roller material: Gcr15 bearing steel forge steel and quench treatment hardness 58-62, chrome coated 0.05mm
5) Roll station: 16 groups
6) Raw material: 2.5-3.0mm
7) Width of purlin: 100-300mm adjustable
8) Working speed: 10m--15m/min(Exclude cutting time)
9) Length Tolerance: ±1.5mm
10) Weight of machine: about 7ton
11) Size of machine: About 11000×1000×1500mm L x W x H
12) Color of machine: depend on customer
13) Coder: Omron
14) Control: PLC Panasonic, made in Japan. 380V 50HZ
15) Computer operating panel: touching screen
16) Punching: Hydraulic punching before roll forming
17) Cutting: Hydraulic cutting after roll forming
18) Cutting when reach the set length.
19) Hydraulic power: 5.5KW
20) Blade material: Cr12,quenched 58°-62°
21) Working pressure:20mpa Cutting tolerance: +/- 1.5mm
Equipment list:
NO. | Product | QTY |
1 | 5T Manual uncoiler | 1 |
2 | Main Roll forming(cutting, PLC computer, Hydraulic system) | 1 |
3 | Output table | 2 |
The profile drawing:
Working flow:
Uncoiler—Feeding—Leveling—Punching--roll forming---hydraulic cut to length—output table
Main specification:
Manual uncoiler
1) Capacity: 5ton
2) Feeding width: MAX 600mm
3) Expanding range: 460-520mm
Main roll forming system
1) Main motor power: 18.5kw
2) Drive: Chain
3) Main shaft dia: 85mm material: 45#forge steel and quenched
4) Roller material: Gcr15 bearing steel forge steel and quench treatment hardness 58-62, chrome coated 0.05mm
5) Roll station: 16 groups
6) Raw material: 2.5-3.0mm
7) Width of purlin: 100-300mm adjustable
8) Working speed: 10m--15m/min(Exclude cutting time)
9) Length Tolerance: ±1.5mm
10) Weight of machine: about 7ton
11) Size of machine: About 11000×1000×1500mm L x W x H
12) Color of machine: depend on customer
13) Coder: Omron
14) Control: PLC Panasonic, made in Japan. 380V 50HZ
15) Computer operating panel: touching screen
16) Punching: Hydraulic punching before roll forming
17) Cutting: Hydraulic cutting after roll forming
18) Cutting when reach the set length.
19) Hydraulic power: 5.5KW
20) Blade material: Cr12,quenched 58°-62°
21) Working pressure:20mpa Cutting tolerance: +/- 1.5mm
Equipment list:
NO. | Product | QTY |
1 | 5T Manual uncoiler | 1 |
2 | Main Roll forming(cutting, PLC computer, Hydraulic system) | 1 |
3 | Output table | 2 |
+86-17768307386
