 |
Specification.
1. Door curtain: High strength polyster textile fiber
2. Curtain thickness: 0.8 - 1.2 mm
3. Opening speed: 0.8 - 1.5 M/S
4. Closing speed: 0.6 - 1.0 M/S
5. Side Rail options: 2.0mm thick cold-roll steel sheet (Bao Steel) / 2.0mm thick stainless steel
6. Tube shaft: 114mm diameter / 2.5mm thickness round tube
7. Cover box options: 1.0mm thick cold-roll steel shett (Bao Steel ) / 1.0mm thick stainless steel
8. Motor brand: SEW / NORD
9. Motor power: 550W / 750W / 1500W / 2200W / 4000W
10. Control box: HOLIP / MITSUBISHI
11. Safety performance: Airbag / Photo cell
12. Optional control mode:Loop Sensor, Radar, Remote control, Linkage interlock, Pull rope, etc..
| Control System | Japan Mitsubishi Inveter, PLC and other components. |
| Dynamical Systems | Motor: SEW or Nord from Germany Factory.(China unit: SEJ/SERVO system) |
| Most stable brake system or Advanced Servo System, 220V~380V/50 -60HZ | |
| Power: 0.75kw ~ 3.0kw(According to the size of door) | |
| Fast Speed Gate Construction | |
| Framework | In 2mm thickness cold-roll steel sheet or on request in Stainless steel INOX201/304, Plaint color accordingly to your order |
| Rolling Drum | 2mm thickness steel/Galvanized rube with machined blacks at each side and incorporating high-speed bearing. |
| Cross Bar | Normal in aluminum rod for small doors. Additional with Steel pipe for large opening and high-wind application. |
| Color | Red/Yellow/Blue/Sky blue/Orange/Mesh white and yellow/White/Green/Black/Grey. |
| Transparent Window | Transparent pvc sheet 1.5mm thickness. Window sizes and loaction accordingly to your requirement. |
| Command System | Magnetic Loop/Radar Sensor/Rope switch/Remote Control/Finger printer/Bluetooth/Key card etc. |
| Safety System & Seal | |
| Photocell Sensor | Installed ont he side track with emergency rebound opening when sensing obstacles. |
| Safety edge bottom | When the people or vehicle touch the bottom edge of closing doors, It bound up automaticlly. |
| Emergency stop protection | With emergency stop button on the main control board. |
| Seal | Seal brush are installed inside of guider rail. Besides there is trap heavier fabric on the bottom, Close to any uneven ground. |
| Technical Parameter | Power Supply: Single or Three phase 220V~260V.. Three phase 380V~460V. 50/60HZ. |
| Max Size: 10m width * 15m height | |
| Opening & Colsing speed: 0.7~1.5m/S | |
| Operation Frequency: 1000~1500 Cycles/Day | |
| Wind load: 15m/S | |
