Working flow:
Decoiling → Roll forming →Post cutting → Simple auto-stacker
A.Material of Main Equipment
Roller Material
High grade No.45 forged steel, with digital-controlled procession, Panted with hard chrome.
Active Shaft Material
High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft
Electric Elements
PLC control panel, transducer imported from Siemens of Germany Cutter bladeCr12 mould steel with quenched treatment
B.Main Forming machine:
Material SpecColor steel sheet;
Thickness: 0.55-0.75mm Working Speed
10.0 ~ 12.0 m/min. ( nodal distance at 250mm)
Cutting Tolerance≤±2.5mm ( length≤ 5000mm)
≤±3mm ( 5000mm < length ≤ 10000mm) Power RequirementMain motor power: 4Kw
Hydraulic station power: 3Kw
UncoilerMax. Capacity: 3T width:600mm
Main roller qty 11standsdouble raw Type of cuttingRoll-formed and post cutting
Machine Dimension About 5500×500×1200mm
C.Component and Function
Coil Feeding Equipment Consists of one uncoiler with capacity of 3T and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction
Guiding Equipment
Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
Mainframe Transmission Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.
Roll forming system
The main frame of machine is welded separately and the outside wall is connected by screw after being rotoblasted on the surface.The rollers are surface-chromeplated after being
machined by the exact machine tool.
Post Cut Equipment
The length and blocks can be set by the buyer through the control panel, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.
Hydraulic Station
Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.
Working flow:
Decoiling → Roll forming →Post cutting → Simple auto-stacker
A.Material of Main Equipment
Roller Material
High grade No.45 forged steel, with digital-controlled procession, Panted with hard chrome.
Active Shaft Material
High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft
Electric Elements
PLC control panel, transducer imported from Siemens of Germany Cutter bladeCr12 mould steel with quenched treatment
B.Main Forming machine:
Material SpecColor steel sheet;
Thickness: 0.55-0.75mm Working Speed
10.0 ~ 12.0 m/min. ( nodal distance at 250mm)
Cutting Tolerance≤±2.5mm ( length≤ 5000mm)
≤±3mm ( 5000mm < length ≤ 10000mm) Power RequirementMain motor power: 4Kw
Hydraulic station power: 3Kw
UncoilerMax. Capacity: 3T width:600mm
Main roller qty 11standsdouble raw Type of cuttingRoll-formed and post cutting
Machine Dimension About 5500×500×1200mm
C.Component and Function
Coil Feeding Equipment Consists of one uncoiler with capacity of 3T and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction
Guiding Equipment
Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.
Mainframe Transmission Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.
Roll forming system
The main frame of machine is welded separately and the outside wall is connected by screw after being rotoblasted on the surface.The rollers are surface-chromeplated after being
machined by the exact machine tool.
Post Cut Equipment
The length and blocks can be set by the buyer through the control panel, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.
Hydraulic Station
Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.